[Translate to Spanish:] High-performance drill for deep holes

[Translate to Spanish:]


With the new KOMET KUB® Drillmax XL, the expertise gained from developing many special solutions has been transferred to a standard tool range, which is available from stock for 20×D in diameters of 3.0 to 10.0 mm and for 30×D in diameters of 3.0 to 8.0 mm.

The spiral-fluted deep-hole drills have four guide chamfers, ensuring good guidance.





[Translate to Spanish:] Specs:

4 x guide chamfers Drill diameter: for 20×D: 3.00 – 10.0 mm for 30×D: 3.00 – 8.00 mm Shank: DIN 6535 HA Coating: TiAlN Point angle: 140° Helix angle: 30°Internal coolant supply

Your PLUS:

  • 4 x chamfers for high drilling and alignment precision
  • Ideal chip removal due to optimized, special flutes
  • Reliable drilling up to 30×D, with no pecking
  • Significantly reduced production times due to extremely high feed rates and cutting speeds